With a weight of 10 lb, the ViewSonic 27" XG2705-2K has a VESA size of 100 x 100 mm.
The supported weight is a crucial factor to consider when choosing a mount for the ViewSonic 27" XG2705-2K monitor. Throughout our research, we have come across several mounts and assessed their abilities to bear a range of loads. It's essential to pick a mount that can be relied upon to hold up our display's mass firmly and safely. We have personally witnessed the potential consequences of placing too much weight on a mount. It is a scenario we would rather not face, as it might bring about injury to our treasured display and the mount it rests upon.
The mount you choose should have a VESA size range that corresponds to the screw hole pattern on the back of your ViewSonic 27" XG2705-2K monitor, which is standardized by VESA, as different mounts are designed to fit specific VESA sizes.
VESA size: | 100 x 100 mm |
---|---|
Weight: | 10 lb. |
With the VESA measurement and weight of your monitor at your disposal, you can now select a compatible desk mount, wall mount, or monitor stand. Check out our suggested options below to determine which one suits your preferences best.
To guarantee that the monitor mount and stands we recommend below, which are designed to support the 27" XG2705-2K VESA size and weight, will function optimally with your specific setup, it's wise to verify the measurements, compatibility, and mounting position.
Types of Monitor Mounts and Stands
- C-clamp mounts: C-clamp monitor mounts offer a low-cost option by attaching directly to your desk's edge, making installation a simple task. While they are economical and straightforward to set up, our findings indicate that they may not be as stable as other mount designs and could have difficulty accommodating heavier screens. Find C-clamp monitor mounts on Amazon
- Grommet mounts: Grommet monitor mounts connect to your desk via a hole, offering better stability than C-clamp alternatives and supporting more substantial monitors, but setting them up can be trickier and could require you to drill a hole if your desk lacks a pre-drilled one. Find grommet monitor mounts on Amazon
- Wall mounts: A monitor wall mount is a type of monitor mount that attaches to your wall. We found that they are a great option when you don't want any monitors on your desk. They are typically very stable, and they can support heavy monitors. However, we discovered that they can be more challenging to install and may require you to drill holes in your wall. Find monitor wall mounts on Amazon
- Monitor stands: The monitor stand, resting on the desk and not attached to the wall or desk, follows the principle of the original stand. It enables simple adjustments to the monitor's height and angle, improving ergonomics and sight. Plus, it can make more desk space available than the stock stand and is simpler to set up than mounts. However, it may not be as flexible as mounts and may not clear as much desk space as desk/
wall mounts. Find monitor stands on Amazon
In the recommendation sections that follow, I explain the advantages and disadvantages of each monitor mount or stand type to help you better discern the differences between them.
When you're using a desk mount, it's a good idea to get a monitor mount reinforcement plate to protect your desk, particularly if it's glass. The HUANUO Steel Monitor Mount Reinforcement Plate on Amazon is highly recommended.
Declutter your desk and enhance your viewing experience with a single monitor desk mount, offering adjustable positioning, space-saving benefits, and occasional features like cable management and USB connectivity.
These are the pros and cons of single monitor desk mounts for the ViewSonic 27" XG2705-2K monitor, according to our experience:
Pros:
- Streamlines desk space usage
- There's no requirement for holes in your walls
- Permits the alteration of your display's viewing angle to suit your ergonomic needs.
- Various versions are fitted with extra elements like cable sorting mechanisms and built-in USB slots.
Cons:
- It might exceed the price of a normal monitor stand
- There's a risk of desk wear if the installation isn't proper.
- Perfect for a single monitor arrangement
Recommended Single Monitor Desk Mounts
HUANUO Single Monitor Stand Desk Mount for a 13 to 32 Inch Monitor
HUANUO Single Monitor Stand Desk Mount for a 13 to 32 inch monitor Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. This support is tailored for VESA dimensions 75 x 75 to 100 x 100, perfectly fitting the ViewSonic 27" XG2705-2K monitor that has a VESA size of 100 x 100.
Compatible with 13" to 32" diagonal screen sizes and under 22 lb. in weight, the mount is perfect for the ViewSonic 27" XG2705-2K, which weighs 10 lb.
While designed to accommodate a single monitor, it's crucial to acknowledge that these mounts may be more expensive than typical monitor stands. Nevertheless, based on our experience, we believe this mount offers greater flexibility and ease of access.
AVLT Single Monitor Arm Desk Mount for a 13 to 43 Inch Monitor
AVLT Single Monitor Arm Desk Mount for a 13 to 43 inch monitor Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 43 inches Max Weight: 33 lb. Offering support for VESA sizes from 75 x 75 to 100 x 100, this mount is specifically designed for a monitor like the ViewSonic 27" XG2705-2K (100 x 100 VESA size).
For monitors with screen sizes between 13" and 43" and weights less than 33 lb., this mount is suitable, including for the 10 lb. ViewSonic 27" XG2705-2K.
While it is a mount designed to hold a single monitor, it's worth noting that we found these mounts may come with a higher price tag than standard monitor stands. However, based on our experience, we believe this mount provides greater flexibility and accessibility.
Ergotron HX Single Ultrawide Monitor Desk Mount
Ergotron HX Single Ultrawide Monitor Desk Mount Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 15 inches Max Screen Size: 49 inches Max Weight: 42 lb. Designed for VESA measurements between 75 x 75 and 200 x 200, this mount fits the ViewSonic 27" XG2705-2K monitor (100 x 100 VESA size) seamlessly.
Supports screens between 15" and 49" diagonally and monitors up to 42 lb., fitting the 10 lb. ViewSonic 27" XG2705-2K perfectly.
Even though it's a mount designed for a single monitor, it's significant to point out that we discovered these mounts may come with a steeper price tag than common monitor stands. Yet, based on our encounter, we think this mount affords greater flexibility and usability.
VIVO Black Ultra Wide Screen Desk Mount for Up to 55 Inch Screens
VIVO Black Ultra Wide Screen Desk Mount for up to 55 inch screens Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 23 inches Max Screen Size: 55 inches Max Weight: 66 lb. Designed for VESA measurements between 75 x 75 and 400 x 400, this mount fits the ViewSonic 27" XG2705-2K monitor (100 x 100 VESA size) seamlessly.
This mount is suitable for monitors ranging from 23" to 55" in diagonal measurement and under 66 lb., such as the 10 lb. ViewSonic 27" XG2705-2K.
Despite being a mount intended for a single monitor, it's important to recognize that we found these mounts might have a higher cost than regular monitor stands. However, from our perspective, we consider this mount to provide enhanced versatility and convenience.
Utilizing dual monitor desk mounts is an effective way to optimize desk space and foster productivity. They permit the mounting of two monitors onto a single bracket, which clears up a substantial amount of desk area. These mounts are also designed to be adjustable, ensuring an ideal viewing angle, and often incorporate additional features such as cable management and USB ports.
Drawing from our expertise, we list the benefits and drawbacks of dual monitor desk mounts for the ViewSonic 27" XG2705-2K monitor:
Pros:
- Reclaims desk surface area, for dual monitor use.
- Your walls stay free of any drill holes
- Provides flexibility in setting your monitor's viewing angle for optimal comfort.
- Some models come with other various features, such as cable management and built-in USB ports
Cons:
- You might find it pricier than ordinary monitor stands or a lone monitor mount.
- Size constraints could limit which monitors it can accommodate.
- If installed incorrectly, it might lead to wear on the desk.
Recommended Dual Monitor Desk Mounts
HUANUO Dual Monitor Stand for 17 to 27 Inch Monitors
HUANUO Dual Monitor Stand for 17 to 27 inch monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 17 inches Max Screen Size: 27 inches Max Weight: 14 lb. With compatibility for VESA sizes 75 x 75 to 100 x 100, this mount is a great fit for the ViewSonic 27" XG2705-2K monitor with a 100 x 100 VESA measurement.
It supports monitors from 17" to 27" in diagonal size and up to 14 lb. in weight, perfect for the 10 lb. ViewSonic 27" XG2705-2K.
For individuals who utilize dual monitor setups, this mount offers a practical solution to conserve precious desk space. After thorough study and examination, we found this desk mount to be fitting for supporting two monitors. However, we observed that certain monitor types might encounter compatibility challenges due to size restrictions. Despite this, we determined that this mount extends a beneficial and useful option for people looking to maximize their workspace with dual monitors.
HUANUO Dual Monitor Mount Stand for 13 to 35 Inch Monitors
HUANUO Dual Monitor Mount Stand for 13 to 35 inch monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 35 inches Max Weight: 26 lb. This mount, supporting VESA sizes 75 x 75 to 100 x 100, is perfectly compatible with the ViewSonic 27" XG2705-2K monitor, which has a VESA size of 100 x 100.
Accommodating screen sizes of 13" to 35" and weights below 26 lb., the mount is ideal for the 10 lb. ViewSonic 27" XG2705-2K monitor.
If you're seeking to preserve valuable desk space, especially if you employ two monitors, this mount delivers a viable method. After conducting our research and analysis, we discovered that this desk mount is suitable for accommodating two monitors. However, we noticed that compatibility issues may surface with specific monitor types due to size limitations. Nevertheless, we found that this mount offers a practical and useful choice for individuals aiming to optimize their workspace with dual monitors.
EVEO Premium Dual Monitor Mount for 17 to 32 Inch Monitors
EVEO Premium Dual Monitor Mount for 17 to 32 inch Monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 17 inches Max Screen Size: 32 inches Max Weight: 17 lb. For VESA sizes ranging from 75 x 75 to 100 x 100, this mount is suitable for the ViewSonic 27" XG2705-2K monitor, which has a 100 x 100 VESA size.
This monitor mount supports screen sizes between 17" and 32" (diagonal measurements) and monitors that weigh less than 17 lb., which is compatible with the 10 lb. ViewSonic 27" XG2705-2K monitor.
This mount presents a practical way to save essential desk space, particularly for those who utilize dual monitor configurations. After thorough investigation and evaluation, we found this desk mount to be appropriate for holding two monitors. However, we observed that some monitor types may face compatibility problems due to size constraints. Regardless, we concluded that this mount provides a beneficial and efficient alternative for individuals attempting to enhance their workspace with dual monitors.
Desk mounts specifically designed for triple monitors offer an ingenious way to free up desk space and improve your work efficiency. These systems allow for three monitors to be mounted on a single column, which significantly opens up workspace. While they often feature adjustability for positioning, their flexibility may not be on par with single or dual mounts.
Based on our experience, here are some of the pros and cons of triple monitor desk mounts for the ViewSonic 27" XG2705-2K monitor:
Pros:
- Enhances desk area efficiency, suited for three-monitor setups.
- Keeps your walls intact without screw holes
- It permits adjustments to viewing angles.
Cons:
- It tends to be costlier than mounts or stands meant for fewer displays.
- May involve some assembly.
- Some monitors may not be compatible because of size constraints.
- Wear on the desk is a risk with improper setup.
Recommended Triple Monitor Desk Mounts
WALI Triple LCD Monitor Desk Mount
WALI Triple LCD Monitor Desk Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 22 lb. This mounting solution is ideal for the ViewSonic 27" XG2705-2K monitor with a 100 x 100 VESA size, supporting sizes between 75 x 75 and 100 x 100.
The mount can hold monitors with diagonal measurements from 13" to 27" and under 22 lb., fitting the 10 lb. ViewSonic 27" XG2705-2K monitor.
Designed for those who require multiple monitors without sacrificing desk space, this desk mount for three monitors is highly effective. It may carry a higher cost compared to mounts for fewer screens, but its benefits in flexibility and accessibility, as we've found, outweigh the price difference.
Quad monitor desk mounts are another great way to save desk space and improve productivity. They allow you to mount four monitors on a single arm, freeing up plenty of desk space. We found that quad monitor desk mounts are often adjustable to find a good position for your monitors but can sometimes be less flexible than single or dual monitor mounts.
Our exploration uncovers the following pros and cons of quad monitor desk mounts for the ViewSonic 27" XG2705-2K monitor:
Pros:
- Clears up significant desk space, specifically designed for four monitors
- Leaves your walls without any screw holes
- It supports adjustable viewing angles.
Cons:
- Generally, it's more expensive than mounts or stands meant for a lower number of monitors.
- May involve some assembly.
- Monitor size could restrict its compatibility.
- Your desk may suffer wear if the installation isn't done correctly.
Recommended Quad Monitor Desk Mounts
HUANUO Quad Computer Monitor Mount
HUANUO Quad Computer Monitor Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. The ViewSonic 27" XG2705-2K monitor, which possesses a VESA size of 100 x 100, can be fitted on this mount supporting sizes from 75 x 75 to 100 x 100.
Compatible with monitors weighing up to 17 lb., this mount accommodates screen sizes of 13" to 27" diagonally, including the 10 lb. ViewSonic 27" XG2705-2K.
This desk mount is praised for its ability to house four monitors, a feature that our analysis suggests is particularly valuable for those wishing to maximize their desk space while managing multiple monitors. However, it's crucial to understand that mounts suited for more monitors often come at a higher price compared to those for fewer monitors. Even so, based on our experience, the mount's improved flexibility and access make it a worthwhile choice for anyone using multiple monitors.
To save valuable desk space, consider using monitor wall mounts, which eliminate the need for a desk-mounted stand. Our research revealed that the majority of these mounts are built to hold only one monitor. A key benefit of wall-mounted monitor stands is their versatility, enabling you to position your display at the optimal viewing angle. However, it's important to note that, based on our findings, the setup process for these mounts is usually more time-consuming because they need to be firmly attached to a wall.
Based on our hands-on experience, these are the benefits and drawbacks of mounting the ViewSonic 27" XG2705-2K monitor on the wall:
Pros:
- It keeps your desk surface clear
- Enables adjusting the monitor's viewing angle according to your requirements.
- Wall mounts are commonly less costly than their desk-mounted equivalents
- Guarantees a more robust mounting than desk-based solutions
Cons:
- Entails a more prolonged setup procedure than desk-mounted counterparts
- Installation involves puncturing your walls
Recommended Monitor Wall Mounts
Pipishell Full Motion Wall Mount Bracket for Monitors Up to 42 Inches
Pipishell Full Motion Wall Mount Bracket for Monitors up to 42 inches Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 13 inches Max Screen Size: 42 inches Max Weight: 44 lb. This mounting solution is ideal for the ViewSonic 27" XG2705-2K monitor with a 100 x 100 VESA size, supporting sizes between 75 x 75 and 200 x 200.
For monitors with screen sizes between 13" and 42" and weights less than 44 lb., this mount is suitable, including for the 10 lb. ViewSonic 27" XG2705-2K.
This wall mount can reclaim valuable desk space without compromising functionality. It's important to note that the setup process for these mounts may require more time compared to desk mounts. However, based on our experience, we believe the added setup effort is well worth the benefits of enhanced flexibility and accessibility.
Amazon Basics Computer Monitor Wall Mount
Amazon Basics Computer Monitor Wall Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 34 inches Max Weight: 25 lb. This bracket supports VESA sizes between 75 x 75 and 100 x 100 and is perfect for the ViewSonic 27" XG2705-2K monitor, which has a VESA size of 100 x 100.
Screens sized 13" to 34" diagonally and lighter than 25 lb. are supported by this mount, making it a match for the 10 lb. ViewSonic 27" XG2705-2K.
This wall mounting device enables the reclaiming of vital desk space without sacrificing performance. It is essential to note that mounting these can take a longer time than desk mounts. However, the gains in flexibility and accessibility, in our experience, make the extra effort worthwhile.
VideoSecu Tilt Wall Mount Bracket
VideoSecu Tilt Wall Mount Bracket Min VESA: 75 x 75 mm Max VESA: 684 x 400 mm Min Screen Size: 23 inches Max Screen Size: 85 inches Max Weight: 165 lb. Offering support for VESA sizes from 75 x 75 to 684 x 400, this mount is specifically designed for a monitor like the ViewSonic 27" XG2705-2K (100 x 100 VESA size).
For screens sized from 23" to 85" diagonally and weighing below 165 lb., this mount is a good match for the ViewSonic 27" XG2705-2K at 10 lb.
This wall mount system enables you to reclaim vital desk space without forgoing its functionality. It is necessary to note that these mounts' installation might take a bit more effort than desk mounts. However, the benefits of enhanced flexibility and accessibility make the additional effort worthwhile, from our perspective.
A single monitor stand, while similar to the stock stand that comes with monitors, provides increased adjustability and a different design. Typically constructed from metal or plastic, these stands have a base that rests on the desk instead of being secured to the desk or wall. Single monitor stands can be adjusted to various heights and angles, which can improve ergonomics and visibility. Additionally, if designed differently than the original stand, these stands can help to create more usable desk space.
Utilizing our experience, here are the strengths and weaknesses of single monitor stands for the ViewSonic 27" XG2705-2K monitor:
Pros:
- A few stands allow for personalized height and angle settings
- Saves desk space when pitted against the out-of-the-box stand
- Upgrades ergonomic capabilities
- Less demanding setup than monitor mounting alternatives
Cons:
- Not as adaptable as monitor arms in terms of positioning
- They don't free up as much desk space compared to desk/
wall mounts
Recommended Single Monitor Stands
VIVO Adjustable Single Monitor Desk Stand
VIVO Adjustable Single Monitor Desk Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. This mount, supporting VESA sizes 75 x 75 to 100 x 100, is perfectly compatible with the ViewSonic 27" XG2705-2K monitor, which has a VESA size of 100 x 100.
Designed for monitors measuring 13" to 32" diagonally and weighing no more than 22 lb., this mount suits the 10 lb. ViewSonic 27" XG2705-2K.
Contrary to desk mounts, this monitor desk stand simplifies the process of configuring a single monitor. Even though it may not save as much space as desk or wall mounts, its ease of use and design are a clear plus.
TAVR Adjustable Single Monitor Stand
TAVR Adjustable Single Monitor Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. This mount is compatible with VESA sizes from 75 x 75 to 100 x 100, ideal for the ViewSonic 27" XG2705-2K monitor which has a VESA size of 100 x 100.
This mount is suitable for monitors ranging from 13" to 32" in diagonal measurement and under 22 lb., such as the 10 lb. ViewSonic 27" XG2705-2K.
Compared to desk mounts, this monitor desk stand allows for the hassle-free installation of a single monitor. Despite potentially offering less space-saving functionality than desk or wall mounts, its straightforward design and simplicity are a significant advantage.
Hemudu Adjustable Single Monito Desk Stand
Hemudu Adjustable Single Monito Desk Stand Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 50 lb. Suited for VESA sizes 50 x 50 to 100 x 100, the mount matches the ViewSonic 27" XG2705-2K monitor that comes with a 100 x 100 VESA size.
The mount accommodates monitors between 13" to 32" diagonally and less than 50 lb., including the ViewSonic 27" XG2705-2K that weighs 10 lb.
Unlike desk mounts, this monitor desk stand facilitates the quick and easy installation of a single monitor. Although it might not be as space-efficient as desk or wall mounts, its straightforward design and ease of use are a significant benefit.
WALI Fully Adjustable Monitor Stand
WALI Fully Adjustable Monitor Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 17 lb. The mount, designed for VESA sizes between 75 x 75 and 100 x 100, works well with the ViewSonic 27" XG2705-2K monitor that requires a 100 x 100 VESA size.
This mount is suitable for monitors ranging from 13" to 32" in diagonal measurement and under 17 lb., such as the 10 lb. ViewSonic 27" XG2705-2K.
This monitor desk stand, as opposed to desk mounts, enables the hassle-free setup of a single monitor. While it may not offer the same space-saving benefits as desk or wall mounts, its design and simplicity are a notable advantage.
USX MOUNT Single Monitor Stand Mount
USX MOUNT Single Monitor Stand Mount Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. This mount accommodates VESA sizes 50 x 50 to 100 x 100, making it a perfect match for the ViewSonic 27" XG2705-2K monitor with a VESA size of 100 x 100.
Designed for monitors measuring 13" to 27" diagonally and weighing no more than 17 lb., this mount suits the 10 lb. ViewSonic 27" XG2705-2K.
Unlike desk mounts, this monitor desk stand facilitates the quick and easy installation of a single monitor. Although it might not be as space-efficient as desk or wall mounts, its straightforward design and ease of use are a significant benefit.
PERLESMITH Swivel Universal Desk Stand
PERLESMITH Swivel Universal Desk Stand Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 19 inches Max Screen Size: 39 inches Max Weight: 44 lb. Offering support for VESA sizes from 75 x 75 to 200 x 200, this mount is specifically designed for a monitor like the ViewSonic 27" XG2705-2K (100 x 100 VESA size).
This mount supports monitors from 19" to 39" diagonal and under 44 lb. in weight, perfect for the 10 lb. ViewSonic 27" XG2705-2K.
Compared to desk mounts, this monitor desk stand allows for the hassle-free installation of a single monitor. Despite potentially offering less space-saving functionality than desk or wall mounts, its straightforward design and simplicity are a significant advantage.
MOUNTUP Single Monitor Freestanding VESA Desk Mount
MOUNTUP Single Monitor Freestanding VESA Desk Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 17 lb. This mounting solution is ideal for the ViewSonic 27" XG2705-2K monitor with a 100 x 100 VESA size, supporting sizes between 75 x 75 and 100 x 100.
This mounting solution is perfect for screens measuring diagonally from 13" to 32" and weighing under 17 lb., suitable for the 10 lb. ViewSonic 27" XG2705-2K monitor.
In contrast to desk mounts, this monitor desk stand facilitates the effortless configuration of a single monitor. Despite potentially offering less space-saving functionality than desk or wall mounts, its ease of use and design are a clear advantage.
Hemudu Single Monitor Stand for 27-43 Inch Monitors
Hemudu Single Monitor Stand for 27-43 Inch Monitors Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 27 inches Max Screen Size: 43 inches Max Weight: 70 lb. The ViewSonic 27" XG2705-2K monitor, with a 100 x 100 VESA size, is supported by this mount, which handles VESA sizes from 50 x 50 to 100 x 100.
This mounting solution is perfect for screens measuring diagonally from 27" to 43" and weighing under 70 lb., suitable for the 10 lb. ViewSonic 27" XG2705-2K monitor.
Compared to desk mounts, this monitor desk stand enables the quick and easy installation of a single monitor. Although it might not save as much space as desk or wall mounts, its simplicity and design are a significant plus.
WALI Universal Tabletop Stand for 22 to 65 Inch Displays
WALI Universal Tabletop Stand for 22 to 65 inch displays Min VESA: 75 x 75 mm Max VESA: 800 x 400 mm Min Screen Size: 22 inches Max Screen Size: 65 inches Max Weight: 110 lb. Compatible with the ViewSonic 27" XG2705-2K monitor (100 x 100 VESA size), this mount supports VESA dimensions from 75 x 75 to 800 x 400.
Designed for monitors measuring 22" to 65" diagonally and weighing no more than 110 lb., this mount suits the 10 lb. ViewSonic 27" XG2705-2K.
This monitor desk stand, unlike desk mounts, enables the effortless installation of a single monitor. Although it may offer less space-saving capabilities compared to desk or wall mounts, its simplicity and design are a notable benefit.
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 26 inches Max Screen Size: 55 inches Max Weight: 66 lb. The ViewSonic 27" XG2705-2K monitor, which has a VESA size of 100 x 100, fits on this mount, which is designed for VESA sizes between 75 x 75 and 400 x 400.
It is compatible with monitors between 26" and 55" in diagonal size and weighing up to 66 lb., such as the ViewSonic 27" XG2705-2K, which is 10 lb.
Compared to desk mounts, this monitor desk stand facilitates the straightforward configuration of a single monitor. While it might not save as much space as desk or wall mounts, its ease of use and design are a significant advantage.
Hemudu Universal Swivel Stand for 27 to 55 Inch Displays
Hemudu Universal Swivel Stand for 27 to 55 inch displays Min VESA: 100 x 100 mm Max VESA: 400 x 400 mm Min Screen Size: 27 inches Max Screen Size: 55 inches Max Weight: 99 lb. This mount is compatible with VESA sizes from 100 x 100 to 400 x 400, ideal for the ViewSonic 27" XG2705-2K monitor which has a VESA size of 100 x 100.
Compatible with monitors weighing up to 99 lb., this mount accommodates screen sizes of 27" to 55" diagonally, including the 10 lb. ViewSonic 27" XG2705-2K.
In contrast to desk mounts, this monitor desk stand makes it effortless to set up a single monitor. While it may not save as much space as desk or wall mounts, its design and uncomplicated installation process are a notable advantage.
Hemudu Tall Universal Display Stand With 100 Degree Swivel
Hemudu Tall Universal Display Stand with 100 Degree Swivel Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 19 inches Max Screen Size: 42 inches Max Weight: 99 lb. With compatibility for VESA sizes 75 x 75 to 200 x 200, this mount is a great fit for the ViewSonic 27" XG2705-2K monitor with a 100 x 100 VESA measurement.
Supports screens between 19" and 42" diagonally and monitors up to 99 lb., fitting the 10 lb. ViewSonic 27" XG2705-2K perfectly.
Compared to desk mounts, this monitor desk stand allows for the hassle-free installation of a single monitor. Despite potentially offering less space-saving functionality than desk or wall mounts, its straightforward design and simplicity are a significant advantage.
Similar to the stands that come with monitors, a dual monitor stand provides more versatility and a distinct look while supporting one more monitor than a single monitor stand. Usually made from metal or plastic, these stands have a base that sits on the desk instead of being attached to the desk or wall. Dual monitor stands can be adjusted to various heights and angles, which can improve ergonomics and visibility. They can also help to create more desk space if designed differently than the original stand.
Based on our experience, here are some of the pros and cons of dual monitor stands for the ViewSonic 27" XG2705-2K monitor:
Pros:
- Particular models feature the capacity to modify the monitor's vertical placement and tilt to your liking
- Clears up desk space in contrast to the stand that comes with the monitor
- Promotes better ergonomics
- Easier to put together than mounting setups
- Enables users to set up a second display, which single monitor stands cannot do
Cons:
- Not as much flexibility compared to monitor mounts
- They don't unclutter as much desk space as desk or wall mounts
Recommended Dual Monitor Stands
VIVO STAND-V002F Dual Monitor Free-Standing Desk Stand
VIVO STAND-V002F Dual Monitor Free-Standing Desk Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 22 lb. This monitor mount supports VESA sizes between 75 x 75 and 100 x 100, which is compatible with the ViewSonic 27" XG2705-2K monitor (100 x 100 VESA size).
The mount is designed for monitors between 13" and 27" diagonally and less than 22 lb., fitting the ViewSonic 27" XG2705-2K monitor at 10 lb.
This monitor desk stand offers a more straightforward approach to setting up two monitors compared to desk mounts. While it may not provide the same level of space-saving functionality as desk or wall mounts, its uncomplicated design and ease of use are notable perks.
Hemudu Vertical Stack Dual Monitor Stand
Hemudu Vertical Stack Dual Monitor Stand Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 34 inches Max Weight: 44 lb. Tailored to support VESA sizes from 50 x 50 to 100 x 100, this mount is an excellent choice for the ViewSonic 27" XG2705-2K monitor (100 x 100 VESA size).
The mount is designed for monitors between 13" and 34" diagonally and less than 44 lb., fitting the ViewSonic 27" XG2705-2K monitor at 10 lb.
This monitor desk stand distinguishes itself from desk mounts by simplifying the process of setting up dual monitors. While it may not be as space-efficient as desk or wall mounts, its ease of use and uncomplicated design are significant benefits.
WALI Dual Monitor Stand for Up to 27 Inch Monitors
WALI Dual Monitor Stand for up to 27 inch monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 22 lb. Offering support for VESA sizes from 75 x 75 to 100 x 100, this mount is specifically designed for a monitor like the ViewSonic 27" XG2705-2K (100 x 100 VESA size).
Screens sized 13" to 27" diagonally and lighter than 22 lb. are supported by this mount, making it a match for the 10 lb. ViewSonic 27" XG2705-2K.
This monitor desk stand offers a more straightforward approach to setting up two monitors compared to desk mounts. While it may not provide the same level of space-saving functionality as desk or wall mounts, its uncomplicated design and ease of use are notable perks.
HUANUO Dual Monitor Vertical Stack Stand for Up to 32 Inch Displays
HUANUO Dual Monitor Vertical Stack Stand for up to 32 inch displays Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. This mounting solution is ideal for the ViewSonic 27" XG2705-2K monitor with a 100 x 100 VESA size, supporting sizes between 75 x 75 and 100 x 100.
Screens sized 13" to 32" diagonally and lighter than 22 lb. are supported by this mount, making it a match for the 10 lb. ViewSonic 27" XG2705-2K.
Unlike desk mounts, this monitor desk stand allows for the easy setup of two monitors. We found that it may provide less space-saving functionality than desk or wall mounts, but its simplicity and design are an advantage.
MOUNTUP Dual Monitor Stand for Up to 27 Inch Displays
MOUNTUP Dual Monitor Stand for up to 27 inch displays Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. Specifically for monitors like the ViewSonic 27" XG2705-2K with a 100 x 100 VESA size, this mount is compatible with sizes from 75 x 75 to 100 x 100.
This monitor mount supports screen sizes between 13" and 27" (diagonal measurements) and monitors that weigh less than 17 lb., which is compatible with the 10 lb. ViewSonic 27" XG2705-2K monitor.
This monitor desk stand offers a simpler approach to configuring two monitors compared to desk mounts. While it might not be as space-efficient as desk or wall mounts, its uncomplicated nature and appealing design are significant advantages.
Gibbon Mounts Fully Adjustable Dual Monitor Stand
Gibbon Mounts Fully Adjustable Dual Monitor Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. This monitor mount supports VESA sizes between 75 x 75 and 100 x 100, which is compatible with the ViewSonic 27" XG2705-2K monitor (100 x 100 VESA size).
It is compatible with monitors between 13" and 27" in diagonal size and weighing up to 17 lb., such as the ViewSonic 27" XG2705-2K, which is 10 lb.
Contrasting with desk mounts, this monitor desk stand enables users to set up dual monitors with ease. Although it might not be as space-saving as desk or wall mounts, its design simplicity and user-friendliness are considerable advantages.