Weighing 20 lb, the Sceptre 39.5" E415B-QUN168B has a VESA size of 75 x 75 mm.
When it comes to selecting a mount for the Sceptre 39.5" E415B-QUN168B monitor, our experience has shown that the supported weight is a critical factor to consider. We have surveyed a broad spectrum of mounts and appraised their ability to sustain a variety of weights effectively. We must opt for a mount that can reliably and solidly support the burden of our display. Through personal encounters, we have discovered the potential hazards associated with overloading a mount. It is not a situation we want to find ourselves in, as it could damage both our valuable monitor and the mount itself.
When selecting a mount for your Sceptre 39.5" E415B-QUN168B monitor, it's crucial to consider the VESA size range, which refers to the screw hole pattern on the back of the display, as different mounts are designed to accommodate specific VESA sizes standardized by the Video Electronics Standards Association.
VESA size: | 75 x 75 mm |
---|---|
Weight: | 20 lb. |
Armed with the VESA measurement and weight of your monitor, you can now select a compatible desk mount, wall mount, or monitor stand. Check out our recommended options below to find the perfect fit for your setup.
The 39.5" E415B-QUN168B VESA size and weight are supported by the monitor mount and stands we suggest below, but always verify the measurements, compatibility, and mounting location to make sure they will function properly with your arrangement.
Types of Monitor Mounts and Stands
- C-clamp mounts: C-clamp monitor mounts are an affordable solution that attaches to your desk's edge, offering a user-friendly installation process. Although they are low-cost and straightforward to set up, our tests revealed that they may not be as stable as other mount options and could have trouble supporting bulkier monitors. Find C-clamp monitor mounts on Amazon
- Grommet mounts: Grommet monitor mounts attach to your desk through a hole in the surface, delivering better stability than C-clamp alternatives and supporting more substantial displays, but their installation can be trickier and may require you to drill a hole if your desk lacks a pre-drilled one. Find grommet monitor mounts on Amazon
- Wall mounts: If you're looking to maintain a clutter-free desk without any monitors, a wall-mounted monitor stand is an ideal solution. Our research shows that these mounts provide exceptional stability and can hold up even the heaviest screens. However, it's worth noting that the installation process may be more involved, as it may require drilling into your wall. Find monitor wall mounts on Amazon
- Monitor stands: A monitor stand sits on the desk instead of mounted to the wall or desk, similar to the stock stand. We found that they offer flexibility in adjusting the height and angle of the monitor, improving ergonomics and visibility. They can also free up desk space compared to the stock stand and is easier to set up than mounts. However, we discovered they might provide less flexibility than mounts and not free up as much desk space as desk/
wall mounts. Find monitor stands on Amazon
To facilitate a better comparison of these mounts and stands, I describe the merits and demerits of each monitor mount or stand type within the recommendation sections provided below.
To provide an extra layer of security for your desk when using a desk mount, particularly for glass desks, a monitor mount reinforcement plate like the HUANUO Steel Monitor Mount Reinforcement Plate on Amazon is a smart investment.
Upgrade your workstation with a single monitor desk mount, designed to optimize space, provide adjustable viewing angles, and potentially include cable management and integrated USB ports.
From our experience, these are the benefits and drawbacks of using single monitor desk mounts for the Sceptre 39.5" E415B-QUN168B monitor:
Pros:
- Keeps your desk space tidy
- Your walls can stay hole-free
- Enables you to change the monitor's angle to suit your viewing preferences.
- Various models are equipped with supplementary features, including cable control options and embedded USB outlets.
Cons:
- This often comes with a higher price tag than a standard monitor stand
- Incorrect installation may lead to damage on your desk.
- Suitable for mounting a single monitor
Recommended Single Monitor Desk Mounts
AVLT Single Monitor Arm Desk Mount for a 13 to 43 Inch Monitor
AVLT Single Monitor Arm Desk Mount for a 13 to 43 inch monitor Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 43 inches Max Weight: 33 lb. This mount is compatible with VESA sizes from 75 x 75 to 100 x 100, ideal for the Sceptre 39.5" E415B-QUN168B monitor which has a VESA size of 75 x 75.
Accommodating screen sizes of 13" to 43" and weights below 33 lb., the mount is ideal for the 20 lb. Sceptre 39.5" E415B-QUN168B monitor.
While designed for a single monitor, it's essential to keep in mind that these mounts could be more costly than regular monitor stands. Nonetheless, our experience indicates that this mount grants improved flexibility and accessibility.
Ergotron HX Single Ultrawide Monitor Desk Mount
Ergotron HX Single Ultrawide Monitor Desk Mount Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 15 inches Max Screen Size: 49 inches Max Weight: 42 lb. Offering support for VESA sizes from 75 x 75 to 200 x 200, this mount is specifically designed for a monitor like the Sceptre 39.5" E415B-QUN168B (75 x 75 VESA size).
For screens sized from 15" to 49" diagonally and weighing below 42 lb., this mount is a good match for the Sceptre 39.5" E415B-QUN168B at 20 lb.
Although it's a single-monitor mount, it's necessary to note that these mounts might come with a heftier price tag compared to regular monitor stands. However, our experience suggests that this mount delivers enhanced flexibility and user-friendliness.
VIVO Black Ultra Wide Screen Desk Mount for Up to 55 Inch Screens
VIVO Black Ultra Wide Screen Desk Mount for up to 55 inch screens Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 23 inches Max Screen Size: 55 inches Max Weight: 66 lb. With compatibility for VESA sizes 75 x 75 to 400 x 400, this mount is a great fit for the Sceptre 39.5" E415B-QUN168B monitor with a 75 x 75 VESA measurement.
Screens sized 23" to 55" diagonally and lighter than 66 lb. are supported by this mount, making it a match for the 20 lb. Sceptre 39.5" E415B-QUN168B.
Despite being a mount built for a single monitor, it's crucial to acknowledge that these mounts may be pricier than standard monitor stands. Nevertheless, based on our experience, we believe this mount offers greater versatility and ease of access.
Monitor wall mounts offer an effective solution for saving desk space, as they eliminate the need for a desk-mounted stand. We observed that most of these mounts are designed to hold only a single monitor. One advantage of wall-mounted monitor stands is their versatility, allowing you to position your screen at the optimal viewing angle. However, it's important to note that, according to our experience, the installation process for these mounts is usually more time-consuming since they must be securely fastened to a wall.
According to our experience, here are the advantages and disadvantages of mounting the Sceptre 39.5" E415B-QUN168B monitor on the wall:
Pros:
- It prevents your monitors from occupying desk space
- Gives you the freedom to adjust your monitor's viewing angle for optimal viewing pleasure.
- Selecting a wall mount can be a more financially prudent choice than a desk mount
- Provides a more secure installation than desk mounts
Cons:
- Setup process is more involved and lengthy than desk mount alternatives
- Mounting involves boring holes into your walls
Recommended Monitor Wall Mounts
Pipishell Full Motion Wall Mount Bracket for Monitors Up to 42 Inches
Pipishell Full Motion Wall Mount Bracket for Monitors up to 42 inches Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 13 inches Max Screen Size: 42 inches Max Weight: 44 lb. Suited for VESA sizes 75 x 75 to 200 x 200, the mount matches the Sceptre 39.5" E415B-QUN168B monitor that comes with a 75 x 75 VESA size.
This monitor mount supports screen sizes between 13" and 42" (diagonal measurements) and monitors that weigh less than 44 lb., which is compatible with the 20 lb. Sceptre 39.5" E415B-QUN168B monitor.
The wall mount offers a way to recover crucial desk space without detracting from performance. It's worth mentioning that mounting these may take a bit more time than setting up desk mounts. Still, we believe the extra setup time is a small price to pay for the greater versatility and access provided.
VideoSecu Tilt Wall Mount Bracket
VideoSecu Tilt Wall Mount Bracket Min VESA: 75 x 75 mm Max VESA: 684 x 400 mm Min Screen Size: 23 inches Max Screen Size: 85 inches Max Weight: 165 lb. With compatibility for VESA sizes 75 x 75 to 684 x 400, this mount is a great fit for the Sceptre 39.5" E415B-QUN168B monitor with a 75 x 75 VESA measurement.
The mount is designed for monitors between 23" and 85" diagonally and less than 165 lb., fitting the Sceptre 39.5" E415B-QUN168B monitor at 20 lb.
This wall mounting solution allows for the recovery of important desk space without a loss in function. It's essential to remember that the setup for these mounts might require more effort than desk mounts. However, the resultant increase in adaptability and access, in our experience, makes the additional setup time valuable.
Single monitor stands, though resembling the stands provided with monitors, offer enhanced adaptability and a distinctive aesthetic. Commonly fabricated from metal or plastic, these stands feature a base that sits directly on the desk surface rather than being affixed to the desk or wall. Users can modify the height and angle of single monitor stands, which can promote better ergonomics and viewing experience. Furthermore, if designed differently than the stock stand, these stands can help to free up valuable desk space.
From what we've learned, these are the positive and negative aspects of single monitor stands for the Sceptre 39.5" E415B-QUN168B monitor:
Pros:
- Some models give you the freedom to customize the display's vertical alignment and angle
- Clears up desk space in contrast to the stand that comes with the monitor
- Facilitates ergonomic adjustments
- Faster to assemble than mounting alternatives
Cons:
- Offers reduced flexibility in comparison to monitor mounts
- When it comes to freeing up desk space, single monitor stands fall short of desk and wall mounts
Recommended Single Monitor Stands
Hemudu Single Monitor Stand for 27-43 Inch Monitors
Hemudu Single Monitor Stand for 27-43 Inch Monitors Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 27 inches Max Screen Size: 43 inches Max Weight: 70 lb. Compatible with the Sceptre 39.5" E415B-QUN168B monitor (75 x 75 VESA size), this mount supports VESA dimensions from 50 x 50 to 100 x 100.
Compatible with 27" to 43" diagonal screen sizes and under 70 lb. in weight, the mount is perfect for the Sceptre 39.5" E415B-QUN168B, which weighs 20 lb.
Differing from desk mounts, this monitor desk stand permits the uncomplicated installation of a single monitor. Although it might not provide the same space-saving capabilities as desk or wall mounts, its simplicity and design are a significant advantage.
WALI Universal Tabletop Stand for 22 to 65 Inch Displays
WALI Universal Tabletop Stand for 22 to 65 inch displays Min VESA: 75 x 75 mm Max VESA: 800 x 400 mm Min Screen Size: 22 inches Max Screen Size: 65 inches Max Weight: 110 lb. This bracket supports VESA sizes between 75 x 75 and 800 x 400 and is perfect for the Sceptre 39.5" E415B-QUN168B monitor, which has a VESA size of 75 x 75.
Mount suitable for monitors ranging in diagonal size from 22" to 65" and weighing under 110 lb., compatible with the Sceptre 39.5" E415B-QUN168B at 20 lb.
This monitor desk stand, unlike desk mounts, enables the effortless installation of a single monitor. Although it may offer less space-saving capabilities compared to desk or wall mounts, its simplicity and design are a notable benefit.
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 26 inches Max Screen Size: 55 inches Max Weight: 66 lb. Offering support for VESA sizes from 75 x 75 to 400 x 400, this mount is specifically designed for a monitor like the Sceptre 39.5" E415B-QUN168B (75 x 75 VESA size).
This mounting solution is perfect for screens measuring diagonally from 26" to 55" and weighing under 66 lb., suitable for the 20 lb. Sceptre 39.5" E415B-QUN168B monitor.
Contrary to desk mounts, this monitor desk stand simplifies the process of setting up a single monitor. Although it may not be as space-saving as desk or wall mounts, its design and simplicity are a clear benefit.
Hemudu Tall Universal Display Stand With 100 Degree Swivel
Hemudu Tall Universal Display Stand with 100 Degree Swivel Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 19 inches Max Screen Size: 42 inches Max Weight: 99 lb. For VESA sizes ranging from 75 x 75 to 200 x 200, this mount is suitable for the Sceptre 39.5" E415B-QUN168B monitor, which has a 75 x 75 VESA size.
The mount is designed to support monitors with sizes between 19" and 42" diagonally and weights less than 99 lb., including the 20 lb. Sceptre 39.5" E415B-QUN168B.
In contrast to desk mounts, this monitor desk stand allows for the uncomplicated setup of a single monitor. Despite potentially providing less space-saving functionality than desk or wall mounts, its simplicity and design are a clear benefit.