VESA Size and Weight of the Sceptre 35" C355B-QUN168
The Sceptre 35" C355B-QUN168 has a weight of 15 lb and a VESA size of 100 x 100 mm.
Our experience has highlighted the supported weight as a critical factor to consider when selecting a mount for the Sceptre 35" C355B-QUN168 monitor. We have studied multiple mounts and examined their potential to handle varying weights. It's important to choose a mount that we can rely on to safely and securely hold the weight of our monitor. We have seen for ourselves the potential perils that arise when a mount is burdened beyond its recommended limit. We have no desire to be in this predicament, as it could result in injury to our prized monitor and the mount that holds it.
When choosing a mount for your Sceptre 35" C355B-QUN168 monitor, another critical consideration is the VESA size range, which should match the screw hole pattern on the back of your display, as different mounts are designed to accommodate specific VESA sizes set by the Video Electronics Standards Association.
| VESA size: | 100 x 100 mm |
|---|---|
| Weight: | 15 lb. |
Sceptre 35" C355B-QUN168 Mounts and Stands
Now that you have the VESA measurement and weight of your monitor, you can confidently pick a supported desk mount, wall mount, or monitor stand. Take a moment to browse our recommended mounts and stands below to find the best fit for your needs.
Always take the time to confirm the measurements, compatibility, and where to mount the monitor to make sure that the monitor mount and stands we suggest below, which are compatible with the 35" C355B-QUN168 VESA size and weight, will work seamlessly with your arrangement.
Types of Monitor Mounts and Stands
- C-clamp mounts: C-clamp monitor mounts are an affordable solution that can be effortlessly installed by securing onto your desk's edge. Although they are budget-friendly and easy to set up, our research suggests that they might not provide the same stability as other mount varieties and may not be well-suited for weightier monitors. Find C-clamp monitor mounts on Amazon
- Grommet mounts: Grommet monitor mounts connect to your desk via a hole, offering better stability than C-clamp alternatives and supporting more substantial monitors, but setting them up can be trickier and could require you to drill a hole if your desk lacks a pre-drilled one. Find grommet monitor mounts on Amazon
- Wall mounts: A monitor wall mount is a type of stand that attaches your display to the wall, eliminating the need for any screens on your desk. We observed that these mounts offer superior stability and can accommodate even the heftiest monitors. The primary challenge we found is that installation can be a bit more involved, potentially requiring you to drill into your wall. Find monitor wall mounts on Amazon
- Monitor stands: Positioned on the desk, the monitor stand differs from wall or desk-mounted options, echoing the functionality of the standard stand. This setup enhances the flexibility to alter the monitor's height and tilt, promoting better ergonomics and visibility. It also tends to create more desk area compared to the standard stand and is less complex to assemble than mounting systems. However, its versatility may fall short when compared to mounts, and it may not free as much desk area as mounts do. Find monitor stands on Amazon
To facilitate a better comparison of these mounts and stands, I describe the merits and demerits of each monitor mount or stand type within the recommendation sections provided below.
When using a desk mount, it's prudent to use a monitor mount reinforcement plate to prevent damage to your desk, especially glass desks. The HUANUO Steel Monitor Mount Reinforcement Plate on Amazon comes highly recommended.
Single Monitor Desk Mounts
Revolutionize your desk setup with a single monitor desk mount, offering space-saving benefits, improved viewing angles, and adjustable positioning, sometimes accompanied by cable management and built-in USB connectivity.
From our experience, these are the benefits and drawbacks of using single monitor desk mounts for the Sceptre 35" C355B-QUN168 monitor:
Pros:
- Increases available desk space
- Drilling holes in the walls is not required
- Allows for the customization of your display's viewing angle for optimal comfort.
- Various versions are fitted with extra elements like cable sorting mechanisms and built-in USB slots.
Cons:
- It is generally more expensive than a conventional monitor stand
- A desk can become worn if the mount isn't installed the right way.
- Can accommodate just one screen
Recommended Single Monitor Desk Mounts
AVLT Single Monitor Arm Desk Mount for a 13 to 43 Inch Monitor
AVLT Single Monitor Arm Desk Mount for a 13 to 43 inch monitor Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 43 inches Max Weight: 33 lb. This monitor mount supports VESA sizes between 75 x 75 and 100 x 100, which is compatible with the Sceptre 35" C355B-QUN168 monitor (100 x 100 VESA size).
The mount can hold monitors with diagonal measurements from 13" to 43" and under 33 lb., fitting the 15 lb. Sceptre 35" C355B-QUN168 monitor.
While it is a mount designed to hold a single monitor, it's worth noting that we found these mounts may come with a higher price tag than standard monitor stands. However, based on our experience, we believe this mount provides greater flexibility and accessibility.
Ergotron HX Single Ultrawide Monitor Desk Mount
Ergotron HX Single Ultrawide Monitor Desk Mount Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 15 inches Max Screen Size: 49 inches Max Weight: 42 lb. Tailored to support VESA sizes from 75 x 75 to 200 x 200, this mount is an excellent choice for the Sceptre 35" C355B-QUN168 monitor (100 x 100 VESA size).
Supports screens between 15" and 49" diagonally and monitors up to 42 lb., fitting the 15 lb. Sceptre 35" C355B-QUN168 perfectly.
Although this mount is intended for a single monitor, it's important to acknowledge that it may be more expensive than typical monitor stands. Nevertheless, our experience suggests that it offers superior adaptability and convenience.
VIVO Black Ultra Wide Screen Desk Mount for Up to 55 Inch Screens
VIVO Black Ultra Wide Screen Desk Mount for up to 55 inch screens Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 23 inches Max Screen Size: 55 inches Max Weight: 66 lb. This mount is compatible with VESA sizes from 75 x 75 to 400 x 400, ideal for the Sceptre 35" C355B-QUN168 monitor which has a VESA size of 100 x 100.
This mount is compatible with monitors that are 23" to 55" diagonally and weigh under 66 lb., including the 15 lb. Sceptre 35" C355B-QUN168.
Even though it's a mount designed to accommodate a single monitor, it's significant to point out that we discovered these mounts may have a steeper cost than common monitor stands. Yet, based on our encounter, we think this mount affords superior adaptability and usability.
Dual Monitor Desk Mounts
The adoption of desk mounts for dual monitors is a brilliant strategy for enhancing desk space utilization and improving work productivity. These mounts allow for the attachment of two screens on one arm, significantly freeing desk space. They're designed to be adjustable for optimal screen positioning and typically include convenient features like cable organization and USB ports.
With our insight, delve into the advantages and disadvantages of dual monitor desk mounts for the Sceptre 35" C355B-QUN168 monitor:
Pros:
- Enhances desk efficiency, especially with two screens.
- Eliminates the need for drilling holes in your walls
- Permits you to tailor your monitor's viewing angle for a better experience.
- Certain designs come with added functionalities, including ways to manage cables and USB ports that are built in.
Cons:
- The price may be higher compared to traditional monitor stands or individual monitor mounts.
- Size constraints may make it unsuitable for some monitors.
- Your desk could experience wear if not mounted correctly.
Recommended Dual Monitor Desk Mounts
HUANUO Dual Monitor Mount Stand for 13 to 35 Inch Monitors
HUANUO Dual Monitor Mount Stand for 13 to 35 inch monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 35 inches Max Weight: 26 lb. The Sceptre 35" C355B-QUN168 monitor, which possesses a VESA size of 100 x 100, can be fitted on this mount supporting sizes from 75 x 75 to 100 x 100.
For monitors with screen sizes between 13" and 35" and weights less than 26 lb., this mount is suitable, including for the 15 lb. Sceptre 35" C355B-QUN168.
This mount delivers a powerful solution for preserving essential desk space, especially for individuals who employ dual monitor configurations. Our study and examination indicated that this desk mount is fitting for accommodating two monitors, although compatibility challenges may surface with specific monitor types due to size limitations. Regardless, we discovered that this mount extends a beneficial and efficient alternative for people attempting to enhance their workspace with dual monitors.
Wall Mounts
Monitor wall mounts are an excellent option for saving desk space, as they don't require a desk for installation. We observed that most of these mounts are built to hold just a single monitor. One advantage of wall-mounted monitor stands is their versatility, allowing you to position your screen at the optimal viewing angle. However, it's important to note that, according to our experience, the installation process for these mounts is usually more time-consuming since they must be securely attached to a wall.
Based on our practical knowledge, these are the benefits and drawbacks of using wall mounts for the Sceptre 35" C355B-QUN168 monitor:
Pros:
- It doesn't take up any desk space
- Facilitates the ability to change your monitor's viewing angle for a more comfortable viewing experience.
- Wall mounts can be a more economical alternative to desk mounts
- Boasts superior stability when compared to desk mounts
Cons:
- Entails a more prolonged setup procedure than desk-mounted counterparts
- Installation requires creating holes in walls
Recommended Monitor Wall Mounts
Pipishell Full Motion Wall Mount Bracket for Monitors Up to 42 Inches
Pipishell Full Motion Wall Mount Bracket for Monitors up to 42 inches Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 13 inches Max Screen Size: 42 inches Max Weight: 44 lb. This mount is compatible with VESA sizes from 75 x 75 to 200 x 200, ideal for the Sceptre 35" C355B-QUN168 monitor which has a VESA size of 100 x 100.
It is compatible with monitors between 13" and 42" in diagonal size and weighing up to 44 lb., such as the Sceptre 35" C355B-QUN168, which is 15 lb.
The wall mount helps in recapturing valuable desk territory without any loss in functionality. It should be noted that the installation of these mounts could be more time-consuming compared to desk mounts. Nonetheless, our experience has shown that the benefits in flexibility and accessibility are well worth the extra effort.
VideoSecu Tilt Wall Mount Bracket
VideoSecu Tilt Wall Mount Bracket Min VESA: 75 x 75 mm Max VESA: 684 x 400 mm Min Screen Size: 23 inches Max Screen Size: 85 inches Max Weight: 165 lb. This monitor mount supports VESA sizes between 75 x 75 and 684 x 400, which is compatible with the Sceptre 35" C355B-QUN168 monitor (100 x 100 VESA size).
For monitors between 23" and 85" in diagonal size and weighing less than 165 lb., this mount works well, even with the Sceptre 35" C355B-QUN168, which is 15 lb.
Utilizing this wall mount allows for the salvaging of crucial desk space without diminishing its functionality. Be mindful that these mounts' setup process could take more time than that for desk mounts. However, we consider the additional setup time a worthy investment for the resultant enhanced flexibility and accessibility.
Single Monitor Stands
Single monitor stands, although resembling the stands provided with monitors, offer more flexibility and a distinctive design. Commonly made from metal or plastic, these stands feature a base that sits directly on the desk surface rather than being affixed to the desk or wall. Users can adjust the height and angle of single monitor stands, which can promote better ergonomics and viewing experience. Furthermore, if designed differently than the stock stand, these stands can help to maximize desk space.
Drawing from our expertise, here's a list of advantages and disadvantages of single monitor stands for the Sceptre 35" C355B-QUN168 monitor:
Pros:
- Some choices grant you the power to adjust the display's height and viewing angle according to your preferences
- Frees up valuable desk space in comparison to the default stand
- Improves ergonomics
- Easier to set up compared to mounts
Cons:
- Less adjustable than monitor arms in terms of screen placement
- Unlike desk and wall mounts, single monitor stands require more desk space
Recommended Single Monitor Stands
PERLESMITH Swivel Universal Desk Stand
PERLESMITH Swivel Universal Desk Stand Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 19 inches Max Screen Size: 39 inches Max Weight: 44 lb. This bracket supports VESA sizes between 75 x 75 and 200 x 200 and is perfect for the Sceptre 35" C355B-QUN168 monitor, which has a VESA size of 100 x 100.
The mount is designed to support monitors with sizes between 19" and 39" diagonally and weights less than 44 lb., including the 15 lb. Sceptre 35" C355B-QUN168.
Unlike desk mounts, this monitor desk stand enables the uncomplicated configuration of a single monitor. While it may not provide the same space-saving benefits as desk or wall mounts, its design and ease of use are a notable plus.
Hemudu Single Monitor Stand for 27-43 Inch Monitors
Hemudu Single Monitor Stand for 27-43 Inch Monitors Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 27 inches Max Screen Size: 43 inches Max Weight: 70 lb. The Sceptre 35" C355B-QUN168 monitor, which has a VESA size of 100 x 100, fits on this mount, which is designed for VESA sizes between 50 x 50 and 100 x 100.
It supports monitors from 27" to 43" in diagonal size and up to 70 lb. in weight, perfect for the 15 lb. Sceptre 35" C355B-QUN168.
Differing from desk mounts, this monitor desk stand permits the uncomplicated installation of a single monitor. Although it might not provide the same space-saving capabilities as desk or wall mounts, its simplicity and design are a significant advantage.
WALI Universal Tabletop Stand for 22 to 65 Inch Displays
WALI Universal Tabletop Stand for 22 to 65 inch displays Min VESA: 75 x 75 mm Max VESA: 800 x 400 mm Min Screen Size: 22 inches Max Screen Size: 65 inches Max Weight: 110 lb. The Sceptre 35" C355B-QUN168 monitor, with a 100 x 100 VESA size, is supported by this mount, which handles VESA sizes from 75 x 75 to 800 x 400.
This mounting solution is perfect for screens measuring diagonally from 22" to 65" and weighing under 110 lb., suitable for the 15 lb. Sceptre 35" C355B-QUN168 monitor.
This monitor desk stand, differing from desk mounts, allows for the trouble-free setup of a single monitor. While it may not provide the same space-saving benefits as desk or wall mounts, its design and ease of use are a notable advantage.
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 26 inches Max Screen Size: 55 inches Max Weight: 66 lb. This mount, supporting VESA sizes 75 x 75 to 400 x 400, is perfectly compatible with the Sceptre 35" C355B-QUN168 monitor, which has a VESA size of 100 x 100.
For monitors between 26" and 55" in diagonal size and weighing less than 66 lb., this mount works well, even with the Sceptre 35" C355B-QUN168, which is 15 lb.
In contrast to desk mounts, this monitor desk stand facilitates the effortless configuration of a single monitor. Despite potentially offering less space-saving functionality than desk or wall mounts, its ease of use and design are a clear advantage.
Hemudu Universal Swivel Stand for 27 to 55 Inch Displays
Hemudu Universal Swivel Stand for 27 to 55 inch displays Min VESA: 100 x 100 mm Max VESA: 400 x 400 mm Min Screen Size: 27 inches Max Screen Size: 55 inches Max Weight: 99 lb. Designed for VESA measurements between 100 x 100 and 400 x 400, this mount fits the Sceptre 35" C355B-QUN168 monitor (100 x 100 VESA size) seamlessly.
It supports monitors from 27" to 55" in diagonal size and up to 99 lb. in weight, perfect for the 15 lb. Sceptre 35" C355B-QUN168.
In contrast to desk mounts, this monitor desk stand makes it effortless to set up a single monitor. While it may not save as much space as desk or wall mounts, its design and uncomplicated installation process are a notable advantage.
Hemudu Tall Universal Display Stand With 100 Degree Swivel
Hemudu Tall Universal Display Stand with 100 Degree Swivel Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 19 inches Max Screen Size: 42 inches Max Weight: 99 lb. The Sceptre 35" C355B-QUN168 monitor, which possesses a VESA size of 100 x 100, can be fitted on this mount supporting sizes from 75 x 75 to 200 x 200.
For screens sized from 19" to 42" diagonally and weighing below 99 lb., this mount is a good match for the Sceptre 35" C355B-QUN168 at 15 lb.
Unlike desk mounts, this monitor desk stand facilitates the quick and easy installation of a single monitor. Although it might not be as space-efficient as desk or wall mounts, its straightforward design and ease of use are a significant benefit.
