VESA Size and Weight of the BenQ 27" EX270M
The BenQ 27" EX270M is equipped with a VESA size of 100 x 100 mm and weighs 10 lb.
When selecting a mount for the BenQ 27" EX270M monitor, we have learned from our experience that one of the critical factors to consider is the supported weight. We have conducted a thorough examination of various mounts and analyzed their ability to endure a spectrum of weight loads. We must opt for a mount that can reliably and solidly support the burden of our display. We have seen up close the hazards that can occur when a mount is forced to bear excessive weight. We seek to avoid this scenario, as it could bring about deterioration to our prized screen and the mount beneath it.
As you search for the perfect mount for your BenQ 27" EX270M monitor, remember to consider the VESA size range, which refers to the standardized screw hole pattern on the back of the display set by the Video Electronics Standards Association, as different mounts are designed to accommodate specific VESA sizes.
| VESA size: | 100 x 100 mm |
|---|---|
| Weight: | 10 lb. |
BenQ 27" EX270M Mounts and Stands
Given the VESA measurement and weight of your monitor, you can confidently choose a supported desk mount, wall mount, or monitor stand. Peruse our curated list of mounts and stands below to determine which option best suits your setup.
Always take the time to confirm the measurements, compatibility, and where to mount the monitor to make sure that the monitor mount and stands we suggest below, which are compatible with the 27" EX270M VESA size and weight, will work seamlessly with your arrangement.
Types of Monitor Mounts and Stands
- C-clamp mounts: C-clamp monitor mounts are an inexpensive option that can be effortlessly installed by securing onto your desk's edge. While they are cost-effective and simple to set up, our research suggests that they may not provide the same stability as other mount varieties and could have difficulty supporting weightier monitors. Find C-clamp monitor mounts on Amazon
- Grommet mounts: Connecting to your desk via a hole, grommet monitor mounts offer enhanced stability in comparison to C-clamp stands and can sustain heavier monitors, although setting them up can be more intricate and could involve drilling a hole if one isn't already present in your desk. Find grommet monitor mounts on Amazon
- Wall mounts: If you're looking to maintain a clutter-free desk without any monitors, a wall-mounted monitor stand is an ideal solution. Our research shows that these mounts provide exceptional stability and can hold up even the heaviest screens. However, it's worth noting that the installation process may be more involved, as it may require drilling into your wall. Find monitor wall mounts on Amazon
- Monitor stands: Occupying space on the desk, this monitor stand is a departure from wall or desk-mounted setups, drawing parallels with the stock stand. It introduces enhanced flexibility for adjusting the monitor's height and orientation, fostering better ergonomic practices and visibility. Additionally, it has the capability to liberate more desk space than the original stand and is less complicated to assemble than mounting options. However, it could be less versatile than mounts and not as efficient in conserving desk space as wall or desk mounts. Find monitor stands on Amazon
To help you better differentiate between these mounts and stands, I've included the merits and drawbacks of each monitor mount or stand type in the corresponding recommendation sections.
If you're mounting your monitor on a desk, especially a glass one, consider getting a reinforcement plate for added protection. I suggest the HUANUO Steel Monitor Mount Reinforcement Plate on Amazon .
Single Monitor Desk Mounts
Declutter your desk and enhance your viewing experience with a single monitor desk mount, offering adjustable positioning, space-saving benefits, and occasional features like cable management and USB connectivity.
From our experience, these are the benefits and drawbacks of using single monitor desk mounts for the BenQ 27" EX270M monitor:
Pros:
- Recovers valuable desk space
- Eliminates the need for wall drilling
- Supports the modification of the monitor's viewing angle to fit your personal needs.
- Some designs provide extra options like cable containment and inbuilt USB interfaces.
Cons:
- It can fetch a higher price than a typical monitor stand
- Improperly mounting it can lead to potential wear on the desk.
- Tailored for a single screen setup
Recommended Single Monitor Desk Mounts
HUANUO Single Monitor Stand Desk Mount for a 13 to 32 Inch Monitor
HUANUO Single Monitor Stand Desk Mount for a 13 to 32 inch monitor Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. Offering support for VESA sizes from 75 x 75 to 100 x 100, this mount is specifically designed for a monitor like the BenQ 27" EX270M (100 x 100 VESA size).
Designed for monitors measuring 13" to 32" diagonally and weighing no more than 22 lb., this mount suits the 10 lb. BenQ 27" EX270M.
While it's a mount built to hold a single monitor, it's necessary to note that these mounts might be more costly than typical monitor stands. However, our experience suggests that this mount delivers superior adaptability and user-friendliness.
AVLT Single Monitor Arm Desk Mount for a 13 to 43 Inch Monitor
AVLT Single Monitor Arm Desk Mount for a 13 to 43 inch monitor Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 43 inches Max Weight: 33 lb. Tailored to support VESA sizes from 75 x 75 to 100 x 100, this mount is an excellent choice for the BenQ 27" EX270M monitor (100 x 100 VESA size).
For screens sized from 13" to 43" diagonally and weighing below 33 lb., this mount is a good match for the BenQ 27" EX270M at 10 lb.
While designed for a single monitor, it's essential to keep in mind that these mounts could be more costly than regular monitor stands. Nonetheless, our experience indicates that this mount grants improved flexibility and accessibility.
Ergotron HX Single Ultrawide Monitor Desk Mount
Ergotron HX Single Ultrawide Monitor Desk Mount Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 15 inches Max Screen Size: 49 inches Max Weight: 42 lb. This mount accommodates VESA sizes 75 x 75 to 200 x 200, making it a perfect match for the BenQ 27" EX270M monitor with a VESA size of 100 x 100.
Supports screens between 15" and 49" diagonally and monitors up to 42 lb., fitting the 10 lb. BenQ 27" EX270M perfectly.
Despite being a single-monitor mount, it's crucial to recognize that these mounts might be pricier than conventional monitor stands. However, from our perspective, we consider this mount to deliver enhanced versatility and ease of use.
VIVO Black Ultra Wide Screen Desk Mount for Up to 55 Inch Screens
VIVO Black Ultra Wide Screen Desk Mount for up to 55 inch screens Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 23 inches Max Screen Size: 55 inches Max Weight: 66 lb. This mount is compatible with VESA sizes from 75 x 75 to 400 x 400, ideal for the BenQ 27" EX270M monitor which has a VESA size of 100 x 100.
For monitors between 23" and 55" in diagonal size and weighing less than 66 lb., this mount works well, even with the BenQ 27" EX270M, which is 10 lb.
Although it's a single-monitor mount, it's necessary to note that these mounts might come with a heftier price tag compared to standard monitor stands. However, our experience suggests that this mount delivers superior adaptability and user-friendliness.
Dual Monitor Desk Mounts
The adoption of desk mounts for dual monitors is a brilliant strategy for enhancing desk space utilization and improving work productivity. These mounts allow for the attachment of two screens on one arm, significantly freeing desk space. They're designed to be adjustable for optimal screen positioning and typically include convenient features like cable organization and USB ports.
With our professional insight, consider the advantages and limitations of dual monitor desk mounts for the BenQ 27" EX270M monitor:
Pros:
- Boosts desk space availability, ideal for two-monitor setups.
- Your walls can remain hole-free
- Offers flexibility in how you set your monitor's viewing angle for better usability.
- Various versions provide supplementary features, including cable organization options and integrated USB connectivity.
Cons:
- Expect it to be more costly than regular monitor stands or single mounts.
- Due to its size limitations, some monitors might not be a match.
- The desk could suffer damage if installation is incorrect.
Recommended Dual Monitor Desk Mounts
HUANUO Dual Monitor Stand for 17 to 27 Inch Monitors
HUANUO Dual Monitor Stand for 17 to 27 inch monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 17 inches Max Screen Size: 27 inches Max Weight: 14 lb. Specifically for monitors like the BenQ 27" EX270M with a 100 x 100 VESA size, this mount is compatible with sizes from 75 x 75 to 100 x 100.
It supports monitors from 17" to 27" in diagonal size and up to 14 lb. in weight, perfect for the 10 lb. BenQ 27" EX270M.
For those utilizing dual monitor setups, this mount presents a practical way to conserve precious desk space. Our investigation and evaluation revealed that this desk mount is appropriate for supporting two monitors, although compatibility problems may occur with some monitor types due to size limitations. Despite this, we discovered that this mount offers a handy and efficient solution for users aiming to maximize their workspace with dual monitors.
HUANUO Dual Monitor Mount Stand for 13 to 35 Inch Monitors
HUANUO Dual Monitor Mount Stand for 13 to 35 inch monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 35 inches Max Weight: 26 lb. This mount is compatible with VESA sizes from 75 x 75 to 100 x 100, ideal for the BenQ 27" EX270M monitor which has a VESA size of 100 x 100.
This mount supports monitors from 13" to 35" diagonal and under 26 lb. in weight, perfect for the 10 lb. BenQ 27" EX270M.
This mount presents an efficient approach to saving essential desk space, particularly for those who use dual monitor configurations. Our investigation and assessment indicated that this desk mount is appropriate for holding two monitors, although some monitor types may face compatibility problems due to size constraints. Regardless, we concluded that this mount provides a convenient and effective alternative for users attempting to enhance their workspace with dual monitors.
EVEO Premium Dual Monitor Mount for 17 to 32 Inch Monitors
EVEO Premium Dual Monitor Mount for 17 to 32 inch Monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 17 inches Max Screen Size: 32 inches Max Weight: 17 lb. With compatibility for VESA sizes 75 x 75 to 100 x 100, this mount is a great fit for the BenQ 27" EX270M monitor with a 100 x 100 VESA measurement.
This mount is compatible with monitors that are 17" to 32" diagonally and weigh under 17 lb., including the 10 lb. BenQ 27" EX270M.
This mount offers an effective solution for saving valuable desk space, especially for those who use dual monitor setups. After our research and analysis, we found this desk mount suitable for accommodating two monitors. However, we found that compatibility issues may arise with certain monitor types due to size restrictions. Nonetheless, we found that this mount provides a convenient and effective option for individuals looking to optimize their workspace with dual monitors.
Triple Monitor Desk Mounts
For those aiming to optimize desk space and productivity, triple monitor desk mounts are an excellent choice. They facilitate the mounting of three screens on a single fixture, thus saving a notable amount of space. Although typically adjustable for ideal positioning, their flexibility might be slightly less compared to single or dual monitor mounts.
Reflecting on our usage, we've outlined the benefits and drawbacks of triple monitor desk mounts for the BenQ 27" EX270M monitor:
Pros:
- Clears more space on the desk, specifically for three-monitor arrangements.
- No screw holes are needed in your walls
- It supports adjustable viewing angles.
Cons:
- It tends to be costlier than mounts or stands meant for fewer displays.
- It might need to be assembled.
- It might not suit all monitors because of their sizes.
- Incorrect installation might lead to damage on your desk.
Recommended Triple Monitor Desk Mounts
WALI Triple LCD Monitor Desk Mount
WALI Triple LCD Monitor Desk Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 22 lb. This mount, supporting VESA sizes 75 x 75 to 100 x 100, is perfectly compatible with the BenQ 27" EX270M monitor, which has a VESA size of 100 x 100.
The mount can hold monitors with diagonal measurements from 13" to 27" and under 22 lb., fitting the 10 lb. BenQ 27" EX270M monitor.
Our evaluation indicates that this desk mount, capable of supporting three monitors, is particularly advantageous for maximizing workspace while using multiple screens. While the price may be higher than that of stands or mounts for fewer monitors, the increased adaptability and ease of use make it a valuable asset for users needing more monitors.
Quad Monitor Desk Mounts
To optimize desk space and improve productivity, consider using quad monitor desk mounts. These mounts allow for four monitors to be supported on a single arm, liberating a substantial amount of desk area. While they are often adjustable for finding the perfect monitor setup, they might not have the flexibility of mounts designed for fewer monitors.
From our evaluation, these are the upsides and downsides of quad monitor desk mounts for the BenQ 27" EX270M monitor:
Pros:
- Maximizes the available desk space, ideal when using quad monitor setups
- Eliminates the need for drilling holes in your walls
- It supports adjustable viewing angles.
Cons:
- It usually has a higher price tag than stands or mounts for less monitors.
- Assembly might be necessary.
- There could be compatibility issues with some monitors because of size.
- Desk damage could result from not installing it correctly.
Recommended Quad Monitor Desk Mounts
HUANUO Quad Computer Monitor Mount
HUANUO Quad Computer Monitor Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. This mount, supporting VESA sizes 75 x 75 to 100 x 100, is perfectly compatible with the BenQ 27" EX270M monitor, which has a VESA size of 100 x 100.
Compatible with 13" to 27" diagonal screen sizes and under 17 lb. in weight, the mount is perfect for the BenQ 27" EX270M, which weighs 10 lb.
This desk mount offers the convenience of mounting four monitors. Our analysis found that these mounts are particularly beneficial for those seeking to maximize desk space while utilizing multiple monitors. It is important to note that these mounts may come with a higher price tag compared to stands or mounts designed for fewer monitors. Nevertheless, based on our experience, we believe this mount offers enhanced flexibility and accessibility for those needing multiple monitors.
Wall Mounts
If you're looking to free up desk space, consider using monitor wall mounts, which eliminate the need for a desk-based stand. During our research, we noticed that the majority of these mounts are intended to support only one monitor. A benefit of wall-mounted monitor stands is their adjustability, enabling you to find the perfect position for your display. It's worth mentioning that, based on our findings, setting up these mounts typically takes longer because they need to be firmly secured to a wall.
Based on our experience, here are some of the pros and cons of monitor wall mounts for the BenQ 27" EX270M monitor:
Pros:
- It ensures your monitors don't take up any precious desk real estate
- Provides flexibility in setting your monitor's viewing angle for optimal comfort.
- For the budget-minded, wall mounts are usually more affordable than desk mounts
- Boasts a more unshakable foundation than desk mounts
Cons:
- Installation takes longer than desk mounts due to additional steps
- Involves making holes in your walls for installation
Recommended Monitor Wall Mounts
Pipishell Full Motion Wall Mount Bracket for Monitors Up to 42 Inches
Pipishell Full Motion Wall Mount Bracket for Monitors up to 42 inches Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 13 inches Max Screen Size: 42 inches Max Weight: 44 lb. This bracket supports VESA sizes between 75 x 75 and 200 x 200 and is perfect for the BenQ 27" EX270M monitor, which has a VESA size of 100 x 100.
For monitors with screen sizes between 13" and 42" and weights less than 44 lb., this mount is suitable, including for the 10 lb. BenQ 27" EX270M.
This wall mount can restore valuable desk area without compromising its utility. It must be considered that the installation process for these mounts might extend longer than that for desk mounts. However, the trade-off for increased flexibility and accessibility is, in our experience, worth the extra installation effort.
Amazon Basics Computer Monitor Wall Mount
Amazon Basics Computer Monitor Wall Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 34 inches Max Weight: 25 lb. This mount is compatible with VESA sizes from 75 x 75 to 100 x 100, ideal for the BenQ 27" EX270M monitor which has a VESA size of 100 x 100.
The mount can hold monitors with diagonal measurements from 13" to 34" and under 25 lb., fitting the 10 lb. BenQ 27" EX270M monitor.
This wall mounting device enables the reclaiming of vital desk space without sacrificing performance. It is essential to note that mounting these can take a longer time than desk mounts. However, the gains in flexibility and accessibility, in our experience, make the extra effort worthwhile.
VideoSecu Tilt Wall Mount Bracket
VideoSecu Tilt Wall Mount Bracket Min VESA: 75 x 75 mm Max VESA: 684 x 400 mm Min Screen Size: 23 inches Max Screen Size: 85 inches Max Weight: 165 lb. The BenQ 27" EX270M monitor, which possesses a VESA size of 100 x 100, can be fitted on this mount supporting sizes from 75 x 75 to 684 x 400.
For screens sized from 23" to 85" diagonally and weighing below 165 lb., this mount is a good match for the BenQ 27" EX270M at 10 lb.
This wall mounting solution allows for the recovery of important desk space without a loss in function. It's essential to remember that the setup for these mounts might require more effort than desk mounts. However, the resultant increase in adaptability and access, in our experience, makes the additional setup time valuable.
Single Monitor Stands
A single monitor stand, while similar to the stock stand that comes with monitors, provides increased adjustability and a different design. Typically constructed from metal or plastic, these stands have a base that rests on the desk instead of being secured to the desk or wall. Single monitor stands can be adjusted to various heights and angles, which can improve ergonomics and visibility. Additionally, if designed differently than the original stand, these stands can help to create more usable desk space.
From our analysis, here are the pros and cons of single monitor stands for the BenQ 27" EX270M monitor:
Pros:
- Some options allow for personalized modifications to the monitor's elevation and tilt to suit your preferences
- Provides additional desk space when measured against the factory stand
- Polishes ergonomic elements
- More effortless to set up than mounting choices
Cons:
- Not as adjustable as monitor mounting solutions in terms of positioning
- Single monitor stands don't clear up as much desk space as desk or wall mounts
Recommended Single Monitor Stands
VIVO Adjustable Single Monitor Desk Stand
VIVO Adjustable Single Monitor Desk Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. The BenQ 27" EX270M monitor, which possesses a VESA size of 100 x 100, can be fitted on this mount supporting sizes from 75 x 75 to 100 x 100.
This monitor mount supports screen sizes between 13" and 32" (diagonal measurements) and monitors that weigh less than 22 lb., which is compatible with the 10 lb. BenQ 27" EX270M monitor.
In contrast to desk mounts, this monitor desk stand facilitates the effortless configuration of a single monitor. Despite potentially offering less space-saving functionality than desk or wall mounts, its ease of use and design are a clear advantage.
TAVR Adjustable Single Monitor Stand
TAVR Adjustable Single Monitor Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. This support is tailored for VESA dimensions 75 x 75 to 100 x 100, perfectly fitting the BenQ 27" EX270M monitor that has a VESA size of 100 x 100.
The mount accommodates monitors between 13" to 32" diagonally and less than 22 lb., including the BenQ 27" EX270M that weighs 10 lb.
Unlike desk mounts, this monitor desk stand makes it easy to set up a single monitor. While it might not save as much space as desk or wall mounts, its straightforward design and ease of use are a significant advantage.
Hemudu Adjustable Single Monito Desk Stand
Hemudu Adjustable Single Monito Desk Stand Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 50 lb. This mount, supporting VESA sizes 50 x 50 to 100 x 100, is perfectly compatible with the BenQ 27" EX270M monitor, which has a VESA size of 100 x 100.
The mount can hold monitors with diagonal measurements from 13" to 32" and under 50 lb., fitting the 10 lb. BenQ 27" EX270M monitor.
This monitor desk stand, as opposed to desk mounts, permits the hassle-free installation of a single monitor. Even though it may not be as space-efficient as desk or wall mounts, its simplicity and design are a notable plus.
WALI Fully Adjustable Monitor Stand
WALI Fully Adjustable Monitor Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 17 lb. This bracket supports VESA sizes between 75 x 75 and 100 x 100 and is perfect for the BenQ 27" EX270M monitor, which has a VESA size of 100 x 100.
Mount suitable for monitors ranging in diagonal size from 13" to 32" and weighing under 17 lb., compatible with the BenQ 27" EX270M at 10 lb.
This monitor desk stand, unlike desk mounts, enables the effortless installation of a single monitor. Although it may offer less space-saving capabilities compared to desk or wall mounts, its simplicity and design are a notable benefit.
USX MOUNT Single Monitor Stand Mount
USX MOUNT Single Monitor Stand Mount Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. This mount accommodates VESA sizes 50 x 50 to 100 x 100, making it a perfect match for the BenQ 27" EX270M monitor with a VESA size of 100 x 100.
For monitors with screen sizes between 13" and 27" and weights less than 17 lb., this mount is suitable, including for the 10 lb. BenQ 27" EX270M.
This monitor desk stand, as opposed to desk mounts, enables the hassle-free setup of a single monitor. While it may not offer the same space-saving benefits as desk or wall mounts, its design and simplicity are a notable advantage.
PERLESMITH Swivel Universal Desk Stand
PERLESMITH Swivel Universal Desk Stand Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 19 inches Max Screen Size: 39 inches Max Weight: 44 lb. This support is tailored for VESA dimensions 75 x 75 to 200 x 200, perfectly fitting the BenQ 27" EX270M monitor that has a VESA size of 100 x 100.
It is compatible with monitors between 19" and 39" in diagonal size and weighing up to 44 lb., such as the BenQ 27" EX270M, which is 10 lb.
Compared to desk mounts, this monitor desk stand allows for the trouble-free configuration of a single monitor. Despite potentially providing less space-saving functionality than desk or wall mounts, its simplicity and design are a clear plus.
MOUNTUP Single Monitor Freestanding VESA Desk Mount
MOUNTUP Single Monitor Freestanding VESA Desk Mount Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 17 lb. This monitor mount supports VESA sizes between 75 x 75 and 100 x 100, which is compatible with the BenQ 27" EX270M monitor (100 x 100 VESA size).
The mount accommodates monitors between 13" to 32" diagonally and less than 17 lb., including the BenQ 27" EX270M that weighs 10 lb.
Unlike desk mounts, this monitor desk stand facilitates the quick and easy installation of a single monitor. Although it might not be as space-efficient as desk or wall mounts, its straightforward design and ease of use are a significant benefit.
Hemudu Single Monitor Stand for 27-43 Inch Monitors
Hemudu Single Monitor Stand for 27-43 Inch Monitors Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 27 inches Max Screen Size: 43 inches Max Weight: 70 lb. The BenQ 27" EX270M monitor, which possesses a VESA size of 100 x 100, can be fitted on this mount supporting sizes from 50 x 50 to 100 x 100.
The mount is designed for monitors between 27" and 43" diagonally and less than 70 lb., fitting the BenQ 27" EX270M monitor at 10 lb.
Unlike desk mounts, this monitor desk stand facilitates the quick and easy installation of a single monitor. Although it might not be as space-efficient as desk or wall mounts, its straightforward design and ease of use are a significant benefit.
WALI Universal Tabletop Stand for 22 to 65 Inch Displays
WALI Universal Tabletop Stand for 22 to 65 inch displays Min VESA: 75 x 75 mm Max VESA: 800 x 400 mm Min Screen Size: 22 inches Max Screen Size: 65 inches Max Weight: 110 lb. Offering support for VESA sizes from 75 x 75 to 800 x 400, this mount is specifically designed for a monitor like the BenQ 27" EX270M (100 x 100 VESA size).
Accommodating screen sizes of 22" to 65" and weights below 110 lb., the mount is ideal for the 10 lb. BenQ 27" EX270M monitor.
Contrary to desk mounts, this monitor desk stand simplifies the process of setting up a single monitor. Although it may not be as space-saving as desk or wall mounts, its design and simplicity are a clear benefit.
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays
USX MOUNT Universal Swivel Stand for 26-55 Inch Displays Min VESA: 75 x 75 mm Max VESA: 400 x 400 mm Min Screen Size: 26 inches Max Screen Size: 55 inches Max Weight: 66 lb. This mounting solution is ideal for the BenQ 27" EX270M monitor with a 100 x 100 VESA size, supporting sizes between 75 x 75 and 400 x 400.
Compatible with 26" to 55" diagonal screen sizes and under 66 lb. in weight, the mount is perfect for the BenQ 27" EX270M, which weighs 10 lb.
Contrary to desk mounts, this monitor desk stand simplifies the process of setting up a single monitor. Although it may not be as space-saving as desk or wall mounts, its design and simplicity are a clear benefit.
Hemudu Universal Swivel Stand for 27 to 55 Inch Displays
Hemudu Universal Swivel Stand for 27 to 55 inch displays Min VESA: 100 x 100 mm Max VESA: 400 x 400 mm Min Screen Size: 27 inches Max Screen Size: 55 inches Max Weight: 99 lb. Designed for VESA measurements between 100 x 100 and 400 x 400, this mount fits the BenQ 27" EX270M monitor (100 x 100 VESA size) seamlessly.
For screens sized from 27" to 55" diagonally and weighing below 99 lb., this mount is a good match for the BenQ 27" EX270M at 10 lb.
Contrary to desk mounts, this monitor desk stand simplifies the process of configuring a single monitor. Even though it may not save as much space as desk or wall mounts, its ease of use and design are a clear plus.
Hemudu Tall Universal Display Stand With 100 Degree Swivel
Hemudu Tall Universal Display Stand with 100 Degree Swivel Min VESA: 75 x 75 mm Max VESA: 200 x 200 mm Min Screen Size: 19 inches Max Screen Size: 42 inches Max Weight: 99 lb. This mount accommodates VESA sizes 75 x 75 to 200 x 200, making it a perfect match for the BenQ 27" EX270M monitor with a VESA size of 100 x 100.
Mount suitable for monitors ranging in diagonal size from 19" to 42" and weighing under 99 lb., compatible with the BenQ 27" EX270M at 10 lb.
In contrast to desk mounts, this monitor desk stand facilitates the effortless configuration of a single monitor. Despite potentially offering less space-saving functionality than desk or wall mounts, its ease of use and design are a clear advantage.
Dual Monitor Stands
A dual monitor stand is also similar to what monitors come initially within the box but adds more flexibility and has a different style. It can hold one more monitor than a single monitor stand. We found that these stands are typically made of metal or plastic and have a base that sits on the desk instead of being mounted to the desk or wall. Dual monitor stands can be adjusted to different heights and angles, which we found can help improve ergonomics and visibility. They can also help to free up desk space if designed differently than the stock stand.
Drawing from our expertise, here are the positive and negative points of dual monitor stands for the BenQ 27" EX270M monitor:
Pros:
- A selection of stands allow for individualized tweaks to screen elevation and orientation
- Keeps your desk more organized than with the stock stand setup
- Refines ergonomic features
- Easier to set up compared to mounts
- They can hold one more monitor than single monitor mounts/
stands
Cons:
- Not as adaptable as monitor arms in terms of positioning
- They don't offer as much desk space reclamation as desk or wall mounts
Recommended Dual Monitor Stands
VIVO STAND-V002F Dual Monitor Free-Standing Desk Stand
VIVO STAND-V002F Dual Monitor Free-Standing Desk Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 22 lb. This mounting solution is ideal for the BenQ 27" EX270M monitor with a 100 x 100 VESA size, supporting sizes between 75 x 75 and 100 x 100.
It supports monitors from 13" to 27" in diagonal size and up to 22 lb. in weight, perfect for the 10 lb. BenQ 27" EX270M.
This monitor desk stand, in contrast to desk mounts, simplifies the process of setting up dual monitors. Although it may not be as space-efficient as desk or wall mounts, its straightforward design and ease of use are significant benefits.
Hemudu Vertical Stack Dual Monitor Stand
Hemudu Vertical Stack Dual Monitor Stand Min VESA: 50 x 50 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 34 inches Max Weight: 44 lb. The BenQ 27" EX270M monitor, which has a VESA size of 100 x 100, fits on this mount, which is designed for VESA sizes between 50 x 50 and 100 x 100.
This mount is suitable for monitors ranging from 13" to 34" in diagonal measurement and under 44 lb., such as the 10 lb. BenQ 27" EX270M.
This monitor desk stand offers a simpler approach to setting up two monitors compared to desk mounts. While it may not maximize space as effectively as desk or wall mounts, its uncomplicated nature and appealing design are significant selling points.
WALI Dual Monitor Stand for Up to 27 Inch Monitors
WALI Dual Monitor Stand for up to 27 inch monitors Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 22 lb. This mount is compatible with VESA sizes from 75 x 75 to 100 x 100, ideal for the BenQ 27" EX270M monitor which has a VESA size of 100 x 100.
Compatible with 13" to 27" diagonal screen sizes and under 22 lb. in weight, the mount is perfect for the BenQ 27" EX270M, which weighs 10 lb.
This monitor desk stand distinguishes itself from desk mounts by allowing for the easy setup of dual monitors. While it might not save as much space as desk or wall mounts, its simplicity and uncomplicated design are significant advantages.
HUANUO Dual Monitor Vertical Stack Stand for Up to 32 Inch Displays
HUANUO Dual Monitor Vertical Stack Stand for up to 32 inch displays Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 32 inches Max Weight: 22 lb. For VESA sizes ranging from 75 x 75 to 100 x 100, this mount is suitable for the BenQ 27" EX270M monitor, which has a 100 x 100 VESA size.
This mount supports monitors from 13" to 32" diagonal and under 22 lb. in weight, perfect for the 10 lb. BenQ 27" EX270M.
Contrasting with desk mounts, this monitor desk stand enables users to set up dual monitors with ease. Although it may not maximize space as effectively as desk or wall mounts, its design simplicity and ease of use are considerable benefits.
MOUNTUP Dual Monitor Stand for Up to 27 Inch Displays
MOUNTUP Dual Monitor Stand for up to 27 inch displays Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. This support is tailored for VESA dimensions 75 x 75 to 100 x 100, perfectly fitting the BenQ 27" EX270M monitor that has a VESA size of 100 x 100.
This mount is compatible with monitors that are 13" to 27" diagonally and weigh under 17 lb., including the 10 lb. BenQ 27" EX270M.
This monitor desk stand offers a simpler approach to setting up two monitors compared to desk mounts. While it may not maximize space as effectively as desk or wall mounts, its uncomplicated nature and appealing design are significant selling points.
Gibbon Mounts Fully Adjustable Dual Monitor Stand
Gibbon Mounts Fully Adjustable Dual Monitor Stand Min VESA: 75 x 75 mm Max VESA: 100 x 100 mm Min Screen Size: 13 inches Max Screen Size: 27 inches Max Weight: 17 lb. This monitor mount supports VESA sizes between 75 x 75 and 100 x 100, which is compatible with the BenQ 27" EX270M monitor (100 x 100 VESA size).
It supports monitors from 13" to 27" in diagonal size and up to 17 lb. in weight, perfect for the 10 lb. BenQ 27" EX270M.
This monitor desk stand, in contrast to desk mounts, simplifies the process of setting up dual monitors. Although it may not be as space-efficient as desk or wall mounts, its straightforward design and ease of use are significant benefits.
